Zoom R24 Manual do Utilizador Página 9

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 8
Basic recording guide
8
Adjust the input sensitivity (GAIN)
Adjust the
GAIN
of each
INPUT
so that their
PEAK
indicators blink
occasionally.
1
Adjust the recording level
2
NOTE
• Ifaninputsignaldistortsduringrecording,refer
toSTEP4andadjusttheinputsensitivityand
recording level.
• Afterrecordinghascompleted,the“Pleasewait”
pop-upwillbedisplayed.Donotturnthepower
OFFortaketheSDcardout whilethispop-up
isopen.Doingsocoulddamagedataorcause
other problems.
Adjust the input sensitivity,
monitoring level and output
STEP 4
Record—Complete—Play
STEP 5
Adjust the monitoring level
Adjust the monitoring
level of an instrument
with the fader of the
track it is being recorded
on. (
INPUT 1
would be
track1,9or17,for
example.)
3
Thered(0dB)indicatorof
the level meter should not
light when you apply an insert
effect to an
INPUT
. Adjust the
patch level, for example, if
necessary.
Press to stop recording.
4
4
Playback
Recording
Ref:Recordingmethodsindetail
  Usinginserteffects
P 17 ~
P81
Press the status key to end recording
standby and make the light green.
1
The track changes from recording standby
(red)toplaybackstandby(green).
Press and then to start
recording.
2
While pressing press to
move to the beginning.
1
Start performing.
Counter starts
3
When green, playback is possible
2
3
Press to start playback.
Press repeatedly
While pressing press to
move to the beginning.
Press
to stop playback.
Vista de página 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 139 140

Comentários a estes Manuais

Sem comentários