
Connecting instruments/Making mono settings
Connecting instruments/Making mono settings
Make settings for instruments such as high impedance guitars, line-input synths, the built-in
mics and mics that use phantom power as well as for stereo and mono input sources.
NOTE
• TurnthePHANTOM switch ONtoprovide+48V
power to INPUTS 3~8.
• Inordertoreducebatteryconsumptionbythe
use of phantom power, it can be turned off to
INPUTS 3, 4, 7 and 8, and the voltage can be
reduceto+24V(Ref.P104).
• UsethefaderthatisinlinewiththeINPUT jack.
The signal from INPUT 1goestotrack1,9or17.
• Tousetracks9~16or17~24pressthe9~16Tr or
17~24Tr key to switch the fader assignment.
• Dependingontheinserteffectselection,the
output can change.
• Createonestereofile fromtwofadersbyusing
the stereo link setting.
Connecting passive-type guitars
Signal to INPUT 1
Connect the high impedance instrument to INPUT 1, and
the turn the Hi-Z switch ON.
Using phantom power
Supply phantom power to the connected mic
Connecting low-impedance instru-
ments (mono connections)
Signals to any INPUT 1~8
Connect low impedance instruments to any INPUT 1~8.
☞
Ref:Stereosetting
P 19
Set the tracks to receive inputs
Press the
1-8Tr
,
9-16Tr
or
17~24Tr
key to set
the bank of tracks that will record the inputs.
Assign
INPUT 1~8
connections to
tracks 1~24
1
Connect instruments and mics.
INPUTS 1~8
Select the bank of tracks.
3
Assign faders to
tracks1~8,9~16
or17~24
Tracks
1~8
Tracks
9~16
Tracks
17~24
2
Make settings for instruments,
built-in mics, stereo tracks, etc.
PHANTOM
Stereo
Mono x 2
MICHi-Z
Mono
4
Press the status key of a track
1–2 times to turn its red light on.
Change the status of the connected inputs.
When red, recording is possible
Recording preparations
INPUT
TRACK
1~8Tr
key active
9~16Tr
key active
17~24Tr
key active
1 1 9 17
2 2 10 18
3 3 11 19
4 4 12 20
5 5 13 21
6 6 14 22
7 7 15 23
8 8 16 24
Comentários a estes Manuais