
Powering the unit
Powering the unit
UsetheincludedACAdapter,whichisdesignedfortheunit,orsixAAbatteries(sold
separately)topowertheunit.
1
Make sure that the power is OFF,
and then plug the included AC
adapter into the back of the unit.
1
Turn the power OFF and open the
battery case cover on the bottom
of the unit.
2
Install the batteries and close the
cover.
NOTE
• AlwaysturnthepowerOFFwhenyouopen/close
thebatterycoverorplug/unplugtheACadapter.
DoingsowhenthepowerisONmightcause
recording data to be lost.
• TheunitcanusealkalineofNiMHbatteries.The
approximate lifetime for alkaline batteries is about
4.5hours.
• Replacethebatterieswhen"LowBattery!"is
shown. Turn the POWER switch to OFF immediately
and install new batteries or connect the included
AC adapter.
• Setthebatterytypetoincreasetheaccuracyof
the battery indicator.
Battery indicator on screen
Using ordinary power (included AC adapter)
Using batteries
Alwaysusethe includedZOOMAD-14
AC adapter, which is designed for use
withtheunit.Usinganyotheradapter
could damage the unit.
HINT
Power supply from USB
If the POWER switch is set to OFF, connecting the
unittoacomputerwithaUSBcablemakestheunit
start-upautomaticallywithpowersuppliedbyUSB.
In this state, functions are different from when the
POWER switch is ON. The unit can be used only as
anSDcardreaderorasanaudiointerface.
•Whenusingtheunitasanaudio interface,if
supplying phantom power, we recommend that
you use the AC adapter.
Battery power
status
No indicator Indicator on
AC adapter
in use
Batteries
in use
Batteriesmust
be changed.
Power will
turn off.
☞
Ref:Settingthebatterytype
P103
Comentários a estes Manuais